TEL: 0086-13706778234

Cable clamp is the place with the highest use and production of cable clamp, and it is also the place with the most obvious quality advantage.

Cable clamp is the place with the highest use and production of cable clamp, and it is also the place with the most obvious quality advantage.
Three advantages of cable clamp:
1. Easy installation: the cable branch can be made without stripping the insulating skin of the cable, and the joint is completely insulated. It is not necessary to cut off the main cable, and branches can be made at any position of the cable. The installation is simple and reliable. It can be installed with electricity only with a socket wrench.

2. Safe use: the joint is resistant to distortion, shock, waterproof, flame retardant, electrochemical corrosion and aging without maintenance. It has been successfully used for more than 30 years.

3. Cost saving: the installation space is very small, saving the cost of bridge and civil engineering. For application in buildings, there is no need for terminal box, junction box and cable return, so as to save cable investment. The cost of cable + puncture clamp is lower than that of other power supply systems, which is only about 40% of the inserted bus and about 60% of the prefabricated branch cable.
The cable fixing clip is mainly used in the cable trench and cooperates with the cable support. It is mostly made of aluminum, FRP, composite materials and other materials. The main function is to support the cable and make the cable fixed and sorted in the cable well.

The cable clamp has the function of fixing. The cable clamp disperses the weight of the cable and the thermomechanical force generated by thermal expansion and cold contraction onto each clamp to be released, so as to prevent the cable from mechanical damage. There are different methods for fixing the clamp under different environmental conditions.

The cable is mainly laid in the tunnel. The snake laying method is adopted, so the cable must be fixed flexibly. This is because when the ambient temperature and load current change, the thermal mechanical force generated by thermal expansion and cold contraction of the cable is large. If this thermal mechanical force is concentrated in a certain part, it will cause cable damage.

Cable fixing clips are widely used in high-rise buildings, subways, high-speed railways, tunnels, etc. they are generally used to fix 110kV and 220kV cables. Cable fixing clips are made of anti-corrosion aluminum alloy and can be installed on cable supports or walls. Fix the cable without damaging the cable. After the high-voltage cable is laid, install the cable fixing clamp to prevent the cable from sliding and crossing, with long service life and strong stability.

The most important evaluation focus of nylon tie is its tripping force. When it is applied to a certain force, no matter whether the belt is broken, reverse teeth, head cracking, any breaking method must be above the nominal tensile force. As for some users who feel that the quality of the tie is poor, some are related to the selected specifications, and they cannot be paranoid that it is the poor quality of the tie, Because the standard tension of a product of a specification has a bottom, when the force required in the use state exceeds the standard greatly, there is no guarantee. The only choice is to replace the product with a higher tension specification. Of course, the cost will rise, which is also a matter of no way. Of course, good quality ties are flexible and have excellent ductility. There will be no direct fracture section and brittleness. In this way, it can also meet the application scope of user’s tension requirements to a greater extent, so as to reduce the cost.

Nylon tie, as the name suggests, is the belt for binding things. Nylon tie is also known as tie, tie wire, bundle wire and tie wire.

Due to the particularity of the product (thin wall and large injection molding process), the mold, injection molding process and materials of nylon tie are quite exquisite. General new manufacturers need a long exploration process to produce qualified products. It is designed with a non-return function (except the loose buckle type), which can only be tightened more and more. It also has a detachable cable tie (loose buckle).

The use of nylon tie is very simple. Pick up a tie, pass it through the small end and tighten it at the free end to lock it. Once locked, it is difficult to open.

Nylon 66 (nylon 66) is used, with fire rating of 94v-2, which is the same as that of self-locking nylon tie. It has good acid resistance, corrosion resistance, insulation, not easy to aging and strong bearing capacity. The operating temperature is – 20 ℃ to + 80 ℃. It is widely used in electronic factories, binding internal connecting wires such as televisions and computers, fixing internal lines of products such as lighting, motors and electronic toys, fixing oil pipelines of mechanical equipment, fixing cable lines on ships, packaging or binding other objects of complete bicycles, as well as binding articles such as agriculture, horticulture and handicrafts. The product has the characteristics of fast binding, good insulation, self-locking and fastening, convenient use and so on.


Post time: Sep-11-2021